Denon DNP-720AE - AirPlay Function; Playing iTunes Music on this Unit; Remote Operations

13
Getting started Connections
Advanced connectionsBasic OperationsBasic operations Advanced Operations TroubleshootingExplanation termsInformation Specifications Index
ENGliSh
Network audio playback
n Switching the display
During playback, Press [DISPLAY].
The file type/bit rate, artist name and album name are displayed.
n Napster operation
Operation buttons Function
8 9
Auto search (cue)
1/3
Playback
2
Stop
MENU Menu
uio p Cursor operation / Auto search (cue, ui)
ENTER Enter
SEARCH Search menu
HOME Return to top page
REPEAT
Repeat playback (vpage18)
RANDOM
Random playback (vpage18)
Automatically presetting FM stations
(Auto Preset)
•This unit can be preset with a total of 99, FM broadcast stations.
•Perform this operation when tuned to an FM broadcast station.
NOTE
Auto preset is not possible with AM broadcast stations.
1
Press [SEARCH].
“Auto Preset” menu appears.
2
Use ui to select “Start”, then press [ENTER],
<1/3 ENTER > or p.
“Searching” appears in the display, and the unit searches for
radio stations. When the search is complete, “Complete!!”
appears.
Canceling auto presetting
Press [2].
NOTE
•Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
•If number that was already assigned as a preset is selected, the old
preset information is overwritten with the new information.
Tuning in radio stations
Connect the antenna beforehand (vpage5).
Listening to FM/AM broadcasts
1
Press [TUNER] to select the reception band.
The reception band is toggled as shown below each time
[TUNER] is pressed.
FM
When listening to an FM broadcast.
AM
When listening to an AM broadcast.
•The reception band can also be selected by pressing
<SOURCE>
(vpage8).
2
Tune in the desired broadcast station.
When a station is received, the will light.
Auto tuning
To tune in automatically.
q Press [MODE] , and “AUTO” lights in the display.
w Press [TUNING d] or [TUNINGf] to select the station you want
to hear.
Manual tuning
To tune in manually.
q Press [MODE] , and “AUTO” goes out in the display.
w Press [TUNING d] or [TUNINGf] to select the station you want
to hear.
•If the desired station cannot be tuned in with auto tuning, tune it in
manually.
•When tuning in stations manually, press and hold [TUNING d] or
[TUNING f] to change frequencies continuously.
•A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
n To stop auto tuning
Press [TUNING d] or [TUNING f].
1.DNP720AEE2_ENG_Final_0727.indd 13 2011/07/30 8:39:08