Denon DNP-720AE - Update Notification; Upgrade Notification; Setting the Others [Other]; Auto Standby

27
Getting started Connections
Basic operations Advanced OperationsAdvanced operations TroubleshootingExplanation termsInformation Specifications Index
ENGliSh
Update Notification
Displays a notification message on this unit’s menu screen when the
latest firmware is released with “Firmware Update”.
Connect to broadband Internet (vpage 6) when using this
function.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Other Network” –
“Update Notication”, then press [ENTER],
<1/3 ENTER > or p.
“Update Notification” menu appears.
3
Use ui to “On”, then press [ENTER],
<1/3 ENTER > or p.
On
Display update message.
Off
Do not display update message.
•When you press [ENTER] or <1/3 ENTER> during display of the
notification message, the “Check for Update” is displayed. (Refer to
page 28 for more information on “Firmware Update”.)
•Press o to erase the notification message.
Setting the network [Network]
Upgrade Notification
Display a notification message on this unit’s menu screen when
downloadable firmware is released with “Add New Feature”.
Connect to broadband Internet (vpage 6) when using this
function.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Other Network” –
“Upgrade Notication”, then press [ENTER],
<1/3 ENTER > or p.
“Upgrade Notification” menu appears.
3
Use ui to “On”, then press [ENTER],
<1/3 ENTER > or p.
On
Display upgrade message.
Off
Do not display upgrade message.
•When you press [ENTER] or <1/3 ENTER> during display of the
notification message, the “Add New Feature” is displayed. (Refer to
page 28 for more information on “Add New Feature”.)
•Press o to erase the notification message.
Setting the others [Other]
Auto Standby
With the Auto Standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
•The default setting is “Off”.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Other” – “Auto Standby”, then
press [ENTER], <1/3 ENTER > or p.
“Select Auto Standby” menu appears.
3
Use ui to select “On”, then press [ENTER],
<1/3 ENTER > or p.
The setting is entered.
NOTE
In the following situations, the Auto standby function does not operate.
•When an iPod or USB memory device is connected to the USB/iPod
port on the unit.
•When the input source is “TUNER”.
•When the input source being played is “Internet Radio”, “Music
Server”, “Last.fm” or “Napster”.
1.DNP720AEE2_ENG_Final_0727.indd 27 2011/07/30 8:39:20