Denon DNP-720AE - Tuning in Radio Stations; TP (Traffic Program); RT (Radio Text); Tuner (FM;AM) Operation

24
ENGliSh
Party Mode Function
The same network audio (Internet radio, music server or iPod) can be
played on multiple products equipped with the Party Mode function
and connected in a network.
The party mode consists of one organizer and up to four attendees.
When one unit starts the party mode as the organizer, up to four
devices on which the party mode function is activated automatically
participate in the party as attendees. “Party Mode Function” must be
set to “On” ahead of time in order to use the party mode function.
n Setting the Party Mode Function
1
Press [PARTY MODE].
“Party Mode” menu appears.
2
Use ui to select “Party Mode Function”, then
press [ENTER], <1/3 ENTER > or p.
“Party Mode Function” menu appears.
3
Use ui to select “On” or “Off”, then press
[ENTER], <1/3 ENTER> or p.
On
Enable party mode function.
Off Disable party mode function.
n Starting the party mode as the organizer
1
Press [PARTY MODE].
“Party Mode” menu appears.
2
Use ui to select “Start Party”, then press [ENTER],
<1/3 ENTER > or p.
•The display switches to the input source selection screen.
•If there are other devices on the same network with the party mode
function enabled, they are automatically selected as attendees.
•“No Network Connection” is displayed when you are not
connected to a network.
3
Play the desired station.
Canceling the party mode
1
Press [PARTY MODE].
“Party Mode” menu appears.
2
Use ui to select “Stop Party”, then press [ENTER],
<1/3 ENTER > or p.
“Exit Party Mode?” is displayed on the menu screen.
3
Use ui to select “Yes”, then press [ENTER],
<1/3 ENTER > or p.
“Attendee P.Off?” is displayed.
4
Use ui to select “Yes” or “No”, then press
[ENTER], <1/3 ENTER > or p.
Yes
The power of the attendees is turned off and the party
mode is canceled.
No
The party mode is canceled without turning off the power
of the attendees.
Setting the network [Network]
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
uio p
<1/3 ENTER>
[ENTER]
[PARTY MODE]
[MENU]
uio p
1.DNP720AEE2_ENG_Final_0727.indd 24 2011/07/30 8:39:17