Denon DNP-720AE - RDS (Radio Data System); PTY (Program Type); PTY Search; Setting the others [Other]

23
Getting started Connections
Basic operations Advanced OperationsAdvanced operations TroubleshootingExplanation termsInformation Specifications Index
ENGliSh
7
Use i to select “Connection”, then press [ENTER],
<1/3 ENTER > or p.
“Connecting” is displayed, and the unit starts connecting to
the network.
•This unit performs automatic network setup due to the DHCP
function.
n WPS Settings (Push-button method)
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Connection” –
“WPS” – “Push Button”, then press [ENTER],
<1/3 ENTER > or p.
3
Use ui to select “Enter”, then press [ENTER],
<1/3 ENTER > or p.
4
Press the WPS button on the access point.
When connection is established with access point,
“Succeeded” is displayed.
n WPS Settings (PIN code method)
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Connection” –
“WPS” – “PIN code”, then press [ENTER],
<1/3 ENTER > or p.
The access point you have set is displayed.
3
Use ui to select the access point whose PIN
code you want to display, and press [ENTER],
<1/3 ENTER> or p.
PIN code number is displayed.
4
Set this PIN code to the register.
When connection is established with access point,
“Succeeded” is displayed.
Setting the network [Network]
n Manual Settings
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Connection” –
“Manual Setting”, then press [ENTER],
<1/3 ENTER > or p.
3
Use ui to select “SSID”, then press [ENTER],
<1/3 ENTER > or p.
4
Use uio p to input the name of the wireless
network (SSID), then press [ENTER] or
<1/3 ENTER >.
•The types of characters that can be input are as shown below.
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH
! “ # $ % & ‘ ( )
z
+ , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
˜
GNumbersH
0123456789 (Space)
5
Use ui to select “Security”, then press [ENTER],
<1/3 ENTER > or p.
6
Use ui to select following items, then press
[ENTER], <1/3 ENTER > or p.
•
None
Select if not encrypted. Can also be used even without
encryption, through we recommend encryption for improved
security.
•
WEP
/
WPA(TKIP)
/
WPA(AES)
/
WPA2(TKIP)
/
WPA2(AES)
Select the encryption method according to the encryption setting
of the access point you are using.
7
Use ui to select “Key”, then press [ENTER] or
<1/3 ENTER >.
Enter the same encryption key as used for the access point.
•When no security settings have been used in the Internet
connection settings, this step is not necessary.
•When connecting to a “WEP” encrypted network, set the access
point “Default Key” to “1”.
8
Use uio p to enter the encryption key, and press
[ENTER] or <1/3 ENTER>.
9
Use i to select “Connection” and press [ENTER],
<1/3 ENTER > or p.
“Connecting” is displayed, and the unit starts connecting to
the network.
•This unit performs automatic network setup due to the DHCP
function.
Last.fm Display
Set whether or not to display Last.fm item on the menu.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Last.fm Display”,
then press [ENTER], <1/3 ENTER > or p.
“Last.fm Display” appears.
3
Use ui to select “Display” or “Hidden”, then press
[ENTER], <1/3 ENTER > or p.
Display
Last.fm items will be displayed.
Hidden
Last.fm items will not be displayed.
1.DNP720AEE2_ENG_Final_0727.indd 23 2011/07/30 8:39:16