Denon DNP-720AE - Zone Management Function

26
ENGliSh
Setting the network [Network]
n PC Language
Selects the language to be used for displaying the Internet sites.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Other Network” –
“PC Language”, then press [ENTER],
<1/3 ENTER > or p.
“PC Language” setting menu appears.
3
Use ui to select computer environment language,
then press [ENTER], <1/3 ENTER > or p.
n Friendly Name Edit
The Friendly Name is the name of this unit displayed on the
network (Maximum 63 characters).
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Other Network”
– “Friendly Name Edit”, then press [ENTER],
<1/3 ENTER > or p.
“Friendly Name Edit” menu appears.
3
Select the friendly name (DENON:[DNP-720AE]),
and press [ENTER], <1/3 ENTER> or p.
4
Edit a friendly name.
•For character input, see page 31.
Zone Management Function
The status of devices connected to the same network can be
displayed. Additionally, network menu browsers can be used via the
network for the connected devices. This is useful when playing back
network services of a device located in a separate room.
Only devices compatible with the Zone Management function can be
operated. With the Zone Management function, the network menu
screen and playback screen of the target device to be controlled are
displayed but playback with this unit is not possible. If you also want to
play the same music as the other device, use the Party Mode function.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Press ui to select “Network” – “Other Network”
– “Zone Management”, and then press [ENTER],
<1/3 ENTER> or p.
•A maximum of 10 DENON devices connected to the same network
as this unit can be displayed.
3
Press ui to select the device, and then press
[ENTER], <1/3 ENTER> or p.
4
Press ui to select “Device Control”, and then
press [ENTER], <1/3 ENTER> or p.
The network menu of the other device is displayed on this
unit’s display.
5
Press ui, [ENTER], <1/3 ENTER> or p to select
the desired track.
1/6
Internet Radio
Music Server
[Friendly Name #1]
•For information about how to operate, refer to the documentation
for each function.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
uio p
<1/3 ENTER>
[ENTER]
[MENU]
uio p
1.DNP720AEE2_ENG_Final_0727.indd 26 2011/07/30 8:39:20