ENGLISH
Getting Started Connections Setup Setting the Timer Other Functions Troubleshooting SpecificationsSystem Functions
1
Use SDB/TONE to select the tone parameter to be
adjusted.
SDB BASS
BALANCES. DIRECT
TREBLE
2
Adjust the volume with <SOURCE> or [o p].
b To make other tone adjustments at this time, press SDB/TONE.
b If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
SDB
: Emphasize the +10dB bass sound.
[Selectable modes]
ON
~
OFF
BASS
: Adjusts the bass sound.
[Variable range]
–8dB
~
+8dB
TREBLE
: Adjusts the treble sound.
[Variable range]
–8dB
~
+8dB
BALANCE
: Adjusts the left/right volume balance.
[Variable range]
+L10
~
CENTER
~
+R10
Press [o] when you want to adjust the left channel, [p]
when you want to adjust the right channel.
S.DIRECT
: The tone is not adjusted.
Settings made upon purchase:
• SDB ········································ OFF
• BASS ·······································0dB
• TREBLE ···································0dB
• BALANCE ························ CENTER
Press [DIMMER].
b The display’s brightness switches each time the button is
pressed.
Press [MUTE].
The “MUTE ON” is displayed.
To cancel, press [MUTE] again.
(The mute mode is also canceled when the <VOLUME> is turned or a
[VOLUME df] is pressed.)
SDB and BASS can be set simultaneously.
Operations During Playback
1
Press TUNER to select the reception band.
b1 UK model only
GAbout the displayH
When “FM AUTO” is selected ∙∙∙∙∙∙∙∙∙∙“AUTO” is displayed.
When “FM MONO” is selected ∙∙∙∙∙∙∙“MONO” is displayed.
When “AM” is selected ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The reception mode is not
displayed.
2
Use [TU –, TU +] to select the reception band.
When a station is received, the “TUNED” indication will light.
• If the function is set to something other than “TUNER”, press TUNER
to switch the function to “TUNER”.
• The function can also be switched to “TUNER” using <SOURCE> or
[SOURCE].
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.
n To tune automatically
Press and hold in [TU –, TU +] to tune in stations automatically.
b Stations whose signal is weak cannot be tuned in.
b In the DAB mode, tuning only moves to receivable stations, so auto
tuning is not possible.
n To stop auto tuning
Press [TU –, TU +].
n Tuning using the PRESET/TUNING buttons on the
main unit
See “Operating using the PRESET/TUNING buttons on the main
unit” (vpage 15).
Bright Dim
DarkOff
Adjusting the Tone
Turning the Sound Off Temporarily
(Muting)
Switching the Brightness of the Display
TUNER Playback
Tuning in Broadcast Stations
Connect the antenna beforehand (vpage 7).
Playback
See overleaf
To Next Page
Loading...
