Denon DRA-F107 - Automatically Presetting FM Stations (Auto Preset)


Getting Started Connections Setup Setting the Timer Other Functions Troubleshooting SpecificationsSystem Functions
ENGLISH
TUNER
[NUMBER] (0~9, + 10)
[MENU]
[DAB/RDS]
[ CH–, CH+ ]
[ CLEAR/DEL ]
[ENTER/MEMO]
[uiop]
TUNER <AUTO PRESET>
<PRESET/TUNING>
Button located on both the main unit and the remote control
unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
About the FM Broadcast Reception Status Display
When the reception band mode is set to “FM AUTO”, the “ST”
indicator lights when a stereo broadcast is tuned in.
If the signal is weak and stable stereo reception is not possible, select
“FM MONO” to receive in monaural.
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
1
Press <AUTO PRESET>.
2
Press <AUTO PRESET> while “FM AUTO PRESET”
is ashing.
Broadcast stations are preset automatically.
Auto presetting with the remote control unit
1
Press [MENU].
2
Select “TUNER SETUP” using [u] and [i], then
press [ENTER/MEMO] or [p].
3
Select “FM AUTO PRESET” using [u] and [i], then
press the [ENTER/MEMO] or [p].
4
Press [ENTER/MEMO] while “FM AUTO PRESET”
is ashing.
Broadcast stations are preset automatically.
n Canceling auto presetting
Press TUNER or [MENU].
NOTE
When the auto presetting operation is performed, the new presettings
overwrite the previous presettings.
Giving station names to preset channels
Names of up to 8 characters can be input.
1
Tune in the preset channel you want to name.
2
Press [ENTER/MEMO] twice.
The display switches to the station name input display.
3
Input the station name.
Names of up to 8 characters can be input.
• [u, i] button ······································ Selects the character.
• [p] button ·································Moves the cursor to the right.
• [CLEAR/DEL] button
···································Deletes the currently selected character.
b Characters that can be input.
A ~ Z, 0 ~ 9, ^ ’ ( ) * + , - . / = (space)
4
Press [ENTER/MEMO].
The characters you have input are entered.
b To give names to other stations, repeat steps 1 to 4.
Automatically Presetting FM Stations
(Auto Preset)
Up to 40 stations can be preset.
Auto preset is not possible with AM broadcast stations.
TUNER Playback
Playback