Denon DRA-F107 - Setting the Sleep Timer

ENGLISH

Getting Started Connections Setup Playback Other Functions Troubleshooting SpecificationsSystem Functions
n To check the timer settings
q Press [MENU].
w Select “TIMER ON/OFF” using [
u
] and[
i
], then press [ENTER/
MEMO].
e When “ON” is displayed for the timer setting, press [ENTER/
MEMO].
 The timer settings are displayed for 3 seconds.
n To change the timer settings
Perform the operations at “Setting the Timer” (vpage 20).
n To change the setting while setting the timer
Press <o>.
The setting returns to the previous step. Display the setting you
want to change, then make the desired setting.
n When performing a timer setting with DENON
control dock for iPod (ASD-11R, ASD-3N or ASD-
3W)
Pause the track you want to play, and keep the power on for DENON
control dock for iPod.
10
Use [o] and [p] to select “ON” or “OFF” for the
timer, then press [ENTER/MEMO].
• The“ ”indicator lights and
the timer setting is entered.
• The timer settings are displayed
for 3 seconds.

11

Set the power to standby.
Timer standby mode is set, and the power indicator lights
orange.
O N C E T I M E R 0 O N 1
E V E R Y D A Y O F F
O N C E T I M E R O N
E V E R Y D A Y 0 O F F 1
O N C E T I M E R 0 O N 1
E V E R Y D A Y O F F
O N C E T I M E R O N
E V E R Y D A Y 0 O F F 1
n Setting the timer to on or off
q Press [MENU].
w Select “TIMER ON/OFF” using [
u
] and[
i
], then press [ENTER/
MEMO].
e Use [
u
] and[
i
] to select “ONCE” or “EVERYDAY”.
r Use [
o
] and[
p
] to select “ON” or “OFF” for the timer, then
press [ENTER/MEMO].The timer settings are displayed after this.
b When set to “OFF”, time operation is disabled, but the timer
settings remain unchanged.
n
To check the time remaining until the sleep timer
is activated
Press [SLEEP].
n Canceling the sleep timer
Either press [SLEEP] to select “SLEEP OFF” or press ON/
STANDBY.
Press [SLEEP] during playback and select the setting
time.
SLEEP 40SLEEP 30SLEEP 20SLEEP 10SLEEP OFF
SLEEP 90 SLEEP 80 SLEEP 70 SLEEP 60 SLEEP 50
b After about 5 seconds, the setting is entered and the display
returns to as it was before.
Setting the Sleep Timer
Use this function to automatically switch the power to the standby
mode after a specific amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps of 10
minutes.
Timer Playback
4
Select the source using [u] and [i], then press
[ENTER/MEMO] or [
p
].
CD TUNER USB/iPod
HDD AUX2 AUX1 (DOCK)
b
b “DOCK” is displayed only when control dock for iPod is
connected.
Only when the “TUNER” function is selected
5
 Select the reception band using [u] and [i], then
press [ENTER/MEMO] or [
p
] (UK model only).
5

Select the preset number using [u] and [i], then
press [ENTER/MEMO] or [
p
].
b When no name has been registered for the selected preset
number, the program service or frequency appears after the preset
number is displayed.
6
Select the “hours” for the timer start time using [u]
and [i], then press [ENTER/MEMO] or [
p
].
7
Select the “minutes” for the timer start time using
[u] and [i], then press [ENTER/MEMO] or [
p
].
8
Select the “hours” for the timer stop time using [u]
and [i], then press [ENTER/MEMO] or [
p
].
9
Select the “minutes” for the timer stop time using [u]
and [i], then press [ENTER/MEMO] or [
p
].
S O U R C E S E L E C T
C D
S O U R C E S E L E C T
C D
O N T I M E
1 0 : 0 0 > 0 0 : 0 0
O N T I M E
1 0 : 0 0 > 0 0 : 0 0
O N T I M E
1 0 : 3 0 > 0 0 : 0 0
O N T I M E
1 0 : 3 0 > 0 0 : 0 0
O F F T I M E
1 0 : 3 0 > 1 1 : 0 0
O F F T I M E
1 0 : 3 0 > 1 1 : 0 0
O F F T I M E
1 0 : 3 0 > 1 1 : 3 0
O F F T I M E
1 0 : 3 0 > 1 1 : 3 0
-1
-2
Setting the Timer