Denon RCD-M40 Service Manual

11
CAUTION IN SERVICING
Initializing This Unit
Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the digital PCB.
1. Press the power button to turn off the power, then unplug the power cord.
2. While holding down buttons the "
8
/-
" and "
SOURCE
" buttons simultaneously, insert the AC plug to turn the
power on.
＊ The unit is initialized.
※ This unit can also be initialized by holding down the "
8
/-
" and "SOURCE" buttons for at least three seconds while the
power is on.
Support for Asia-Pacic tropical climate regions
f
Before selling this product, purchase and attach the tropical standard supporting part.
For this part, see the part list on TROPICAL sheet.
For where to attach the part, see the exploded view.
NOTE: • Initializing the device restores the customized settings to the factory settings. Write down your settings
in advance and recongure the settings after initialization.
8
/ -
Power operation (
X
) SOURCE
RCD-M40DAB

Denon RCD-M40 Specifications

General

Digital tuner	Yes
CD changer	-
Product color	Black

Weight and Dimensions

Depth	234 mm
Width	145 mm
Height	238 mm
Weight	3500 g