Denon RCD-M40

23
5. CD Heat run mode
(1) Insert a disc and press the "
2
" and "
+/
9
" buttons together while inserting the AC plug and turning on the power.
"
13
"
C D 1 1 Tr 4 2 : 5 2
(Same as the usual stopped display except that
13
is lit
/
1
and
3
are both lit)
(2) The unit switches to the mode corresponding to the button that is pressed. See 5.3 ～ 5.5
(3) If an error occurs, an error display appears and the operation stops immediately. The operation count is retained. See
5.3 ～ 5.5
(4) Pressing the "
2
" button clears the heat run count.
(5) Pressing the "
5
" button clears the mode and opens the tray.
(6) The mode can also be cleared by pressing the "
X
" button.
5.1. Normal heat run mode
• Press the "
1
/
3
" button after the CD heat run mode starts and TOC reading is completed. The heat run repetition
count is 0 at this time.
q
Play the disc from the rst track to the last track.
w
All tracks are played if the disc being used contains 20 tracks or less. If the disc contains 21 or more tracks, the unit
plays track 1 and then skips to the last track.
e
When playback of the disc is nished, move the pickup to the inner circumference and open the tray. An increment is
added to the heat run count when the tray is opened.
r
When the loader OPEN status is detected, close the tray again and start playing the disc from the rst track after TOC
has been loaded.
t
Repeat steps
q
～
r
.
【Displaying playback】
"
13
"
C D 0 1 Tr 0 1 : 4 7
(Same as the usual stopped display except that
13
is lit/
1
and
3
are both lit)
【Displaying heat run repetition count (Display in step
e
)】
"
13
"
C D X X X X
(
13
lit/XXXX: heat run repetition count)
5.2. Chucking mode
(1) Press the "
2
" button once while stopped after the CD heat run mode starts and TOC reading is completed.
(2) Repeat TOC reading ⇒ search of rst track on disc ⇒ OPEN tray ⇒ CLOSE tray ⇒ TOC reading.
The heat run repetition count is shown in the time display area.
(3) An increment is added to the heat run count when the loader is OPEN and the process is completed.
【Display while tray is OPEN】
"
13
"
C D X X X X
(
13
lit/XXXX: heat run repetition count)
【Display while tray is CLOSE】
"
13
"
C L O S E
(
13
lit)
【Display during TOC reading】
"
13
"
R E A D I N G
(
13
lit)