Denon RCD-M40

FIRMWARE UPDATE PROCEDURE
1. Updating via USB
The latest rmware can be downloaded to a USB memory for updates.
1.1. Connecting to the USB Memory
(1) Preparation
• Use a memory that supports USB2.0.
• USB format : Prepare a USB memory formatted in FAT16 or FAT32.
• Do not run the USB memory through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB unit.
• If a USB memory device cannot be updated, replace it with a different USB memory device and perform the update
again.
1.2. Unzipping the Downloaded File
Unzip the downloaded le on your computer.
RCD-M40 RCD-M40_XXXXX.zip
Copy that folder to USB ash drive.
The "
xxxxx.bin
" le must be in the root directly of the USB ash drive (memory).
1.3. Insert the USB memory into the USB port.
copy to USB flash drive
RCD-M40_XXXXX.zip
RCD-M40_XXXXX.bin
RCD-M40_XXXXX.bin
Download firmware
in USB flash drive.
29