53
(6) Beeper, indicator LED and vibrator
Items Parameters Defaults Refer to:
Enable √
Beeper
Disable
Section 10.1
Short (60 ms) √
Medium (80 ms)
Beeping time of a short beep
Long (120 ms)
Section 10.1
High √
Medium
Beeper volume
Low
Section 10.1
Tone 1 (2.0 kHz)
Tone 2 (4.0 kHz) √
Beeper frequency
Tone 3 (4.3 kHz)
Section 10.1
Before data transmission √
Trigger timing for the reading completion
beeper and indicator LED
After data transmission
Section 10.1
Enable √
Indicator LED
Disable
Section 10.2
"OK" vibrations √
"NG" vibrations
Vibrator
Disable
Section 10.3
: Can be changed only with the configuration software.
To Next Page
Loading...
