Derby cycle Kalkhoff - Back; Cost Specifications; Electricity Costs; Fuel Consumption

V User Manual Impulse Pedelec 23
5.3.3.4 Fuel type
Under the sub-item “Fuel type”, you can choose between
the options “Petrol” and “Diesel” by pressing the arrow
keys on the control panel. Pressing the Set button con-
rms your selection and then takes you back to the menu
sub-item display.
The information regarding el type is necessary to enable
calculation of the money and CO
2
saved in comparison
with the use of a car. This is displayed in the main menu of
the information area under “Overall system savings”.
5.3.3.5 Back
In order to return to the information area/main menu dis-
play om the menu sub-items, you must select the menu
item “Back” and conrm by pressing the Set button.
5.3.3 Cost specications
Via the menu sub-item “Target cost”, you can
access the sub-items:
• Fuel price (➠ 5.3.3.1)
• Power cost (➠ 5.3.3.2)
• Fuel consumption Ø (➠5.3.3.3)
• Fuel type (➠ 5.3.3.4)
You can select the sub-items using the two arrow keys on
the control panel. Pressing the Set button takes you to the
respective sub-item. By selecting the sub-item “Back” and
pressing the Set button to conrm, you are taken to the
menu sub-item display once more.
5.3.3.1 Fuel price
Under the sub-item “Fuel price”, you can speci the price
of the els petrol or diesel in euros (Eur) and cents (ct).
You can set this to a value in euros between 0 and 9 euros
and a value in cents between 0 and 99 cents by using the
two arrow keys on the control panel to move in 1 euro- and
1 cent-steps respectively. Once you have conrmed both
values by pressing the Set button, you are taken back to
the menu sub-item display.
The price information is necessary to enable calculation of
the money and CO
2
saved in comparison with the use of a
car. This is displayed in the main menu of the information
area under “Overall system savings”.
5.3.3.2 Electricity costs
Under the sub-item “Power cost”, you can speci the price
of electricity in cents (ct). You can set this to a value of
between 0 and 99 cents by using the two arrow keys on
the control panel to move in 1 cent steps. Pressing the Set
button conrms your selection and then takes you back to
the display of menu sub-items.
5.3.3.3 Fuel consumption
You can enter the average el consumption which would
arise om the use of a car. You can set the consumption
in half-litre steps to between 0 and 20 litres. Pressing
the Set button conrms your selection and then takes you
back to the menu sub-item display.
The information regarding the average consumption is
necessary to enable calculation of the money and CO
2
saved in comparison with the use of a car. This is dis-
played in the main menu of the information area under
“Overall system savings”.