EasyManua.ls Logo

Design Analysis H-522 - Page 77

Default Icon
272 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
XL™ Series System Status Menus / Options 8-3
PC Interface View Built In Display Screen
Scanning: Off Not Available In This Area Of
The Built In Menu
This shows of scanning is turned on or off. This can only be viewed in this menu, not changed.
PC Interface View Built In Display Screen
Next Scan: HH:MM:SS Not Available In This Area Of
The Built In Menu
This is a count down timer until the next scan. If scanning is off then XX:XX:XX is displayed
PC Interface View Built In Display Screen
GOES Mode: Off Not Available In This Area Of
The Built In Menu
This identifies the current GOES Mode of operation. If no GOES radio is connected, N/A will be
displayed.
PC Interface View Built In Display Screen
Fail Safe: Ok Not Available In This Area Of
The Built In Menu
This shows if the fail safe function of the GOES radio is ok or tripped. If it is tripped then the
GOES radio will not transmit and the reset button on the GOES radio must be pressed and held
for a few seconds to reset the radio.
PC Interface View Built In Display Screen
Last GPS Sync: DD/MM/YY Not Available In This Area Of
The Built In Menu
This shows the date of the last GPS time sync. If scanning or GOES is off then N/A is displayed

Table of Contents

Related product manuals