Chapter 9
Scanning Options
XL™ Series Scanning Options 9-1
9.1 Introduction
The scanning options in this menu acts like a master switch for turning off or on all automatic
processes such as logging data and transmitting the data, etc. If scanning is disabled the unit will
still function as a sensor. Options here also are used to set the rate data is collected and
processed.
9.2 Scanning Menus
Built in Menu Structure: Scanning Options Menu.
Scan Setup -> Scanning [Off]
Scan Rate [HH:MM:SS]
Next Scan = HH:MM:SS
Nxt Scan At[HH:MM:SS]
PC Menu Screen: Scanning Options. Note: The items in bold are not available in the built in
menu.
Scan Options (Esc to Return)
Current Time: HH:MM:SS
Next Scan: HH:MM:SS
S - Scanning: Off
R - Scan Rate: HH:MM:SS
N - Next Scan At: HH:MM:SS
F - Start A New File:
Enter Option >
To Next Page
Loading...
