6159924330 - 08/2020 - 45 -
As there is only one physical RS232 connector on the controller bottom panel, use the Y cable (part number
6159176200) to use serial ports 1 and 2.
Do not configure serial port 2 if the cable is not used.
RS232 connector wiring diagram
Connecting the controller to the power supply
Use only the following power cords.
Do not modify the power cord and do not use it for any other purpose.
Power cord
Area Length (m) Length (ft) Part number
Europe 2.5 8.20 6159170690
USA NEMA 5-15 2.5 8.20 6159170600
UK 2.5 8.20 6159170700
China 2.5 8.20 6159170610
To Next Page
Loading...
Need help?
General
