3300-0188-0M Rev L y apex Digital Scale Owner’s 5
8. Slide the column cover down onto the base. Note that you may have to pull the cover
out slightly to clear the AC power jack.
9. Place the scale base cover on the scale base and press down on both sides of the
cover. Note that a clicking sound will occur when the cover is snapped in place.
Step 8 Step 9
10.
The scale is now ready for operation.
NOTE: For instructions on powering the scale using the AC power adapter
(if included) or for instructions on how to install batteries, refer to the
INTERCONNECTIONS and BATTERIES sections of this manual.