8529-0637-2M Rev C DL Series Owner’s Manual
OPERATION, CONT.
Temporary-Sale by Weight
1. With the scale in the normal operation mode, enter the Unit Price using the numeric keys.
2. Press the T-Sale key to create a temporary weight PLU.
NOTE: To clear the current temporary PLU and return to the normal operation mode, press
the Cancel key, otherwise proceed to step 3.
3. Place the item on the scale platform, and then press the Print key to print a label.
4. Remove the item from the scale platform to return to the normal operation mode.
Temporary-Sale by Count
1. With the scale in the normal operation mode, enter the Unit Price using the numeric keys.
2. Press the X (multiply key), and then use the numeric keys to enter the quantity.
3. This will create a temporary weight PLU.
NOTE: To clear the current temporary PLU and return to the normal operation mode, press
the Cancel key, otherwise proceed to step 4.
4. Press the Print key to print a label.
5. The scale will return to the normal operation mode.
Price Discount by Subtraction
NOTE: This operation requires the PLU to be programmed as a “2 = Piece Count” PLU.
Refer to Step:3 / Unit in the FAST PLU PROGRAMMING section.
1. With the scale in the normal operation mode, use the numeric keys to enter the PLU
number, and then press the PLU key.
2. Using the numeric keys, enter the discount amount, and then press the -Num key.
3. The Change/Unit Price and Total Price windows will change to show the discounted price,
and the Discount annunciator will turn on in the Total price window.
NOTE: To clear the current temporary PLU and return to the normal operation mode, press
the Cancel key, otherwise proceed to step 4.
4. Press the Print key to print a label.
5. The scale will return to the normal operation mode.
To Next Page
Loading...
Need help?
General
