8529-0637-2M Rev C DL Series Owner’s Manual
DISPLAY ANNUNCIATORS
Tare (lb) Window
ANNUNCIATOR FUNCTION
Auto
Mode
This is turned on to indicate auto mode. When in auto mode, the lock PLU
will activate. In this mode, pre-pack or batch print is executed based on
Spec078 and Spec079.
Gap
Paper
This is turned on when the paper type is gap paper. It is off when the
paper type is plain paper.
Lock
Tare
This is turned on when the tare is locked. Pressing and holding the Tare
key (for approximately four (4) seconds) would lock the tare. Under this
condition, tare would not be cleared after the sale. Pressing and holding
the Tare key again would exit the lock tare.
Lock
PLU
This is turned on when the PLU is locked. Pressing and holding the PLU
key (for approximately four (4) seconds) would lock the PLU. Under this
condition, the former PLU sale state would remain the same after the sale
and will last until a new PLU is transferred. Pressing and holding the PLU
key again would exit the lock PLU.
Weight (lb)/Pcs Window
ANNUNCIATOR FUNCTION
0
This is the Zero weight annunciator. It is turned on when the weight is at
zero and stable.
Manual
Weight
This is turned on when manual weight is displayed.
This is the Stable weight annunciator. It is turned on when the weight is
stable.
NET
This is the Net weight annunciator. It is turned on when Net weight is
displayed.
Shift This is turned on when the Shift key is pressed.
Change ($)/Unit Price $/lb Window
ANNUNCIATOR FUNCTION
Sale This is turned on when the scale is in Sale Mode.
Prog This is turned on when the scale is in the Program Mode.
Account This is turned on when the scale is in the Account Mode
Change
This is turned on when the data in the Change($)/Unit Price $/lb window
is displayed as change.
Unit
Price
This is turned on when the data in the Change($)/Unit Price $/lb window
is displayed as goods.
To Next Page
Loading...
Need help?
General
