Detecto DL1060 User Manual

8529-0637-2M Rev C  DL Series Owner’s Manual
34
ERROR CODES, CONT.
Number Alarm Instructions Methods to Handle
E7.01
Some keys are pressed when
the scale starts
Please confirm that no keys are pressed. The
last window displays pressed keys. 8-5 means
the key in the 8th column from the left and 5th
row from the top is pressed.
E7.11 Gap paper is not taken away
Take away the printed label paper. If there is still
a problem, refer to the Gap Paper Print
Problems section
E7.12
The printhead is not closed
tight
Re-install the paper and make sure the printhead
is closed tight
E7.13 The printer is working Please wait for a few seconds and try again
E7.14 Lack of plain paper
Re-install plain paper or the paper type does not
match
E7.15 Lack of gap paper
Reinstall label paper or paper type cannot match.
If there is still a problem, refer to the Gap Paper
Print Problems section
E7.16
The scale cannot find the gap
intervals
The paper type does not match. Change the type
to plain paper or reinstall the gap label paper. If
there is still a problem, refer to the Gap Paper
Print Problems section
E7.17
The scale cannot find gap
alignment positions
Label paper is used up or paper type does not
match with set paper type, reinstall the label
paper
E7.18
The printer is overheated and
it needs to cool down
Please wait for a few seconds and try again
E7.19
There is no response from the
printer
The printer may not be connected or in a state
that the printer could not print
E7.30
Alarm for full storage of deal
records
Enter the Account interface
Calculate reports and then clear the reports

Detecto DL1060 Specifications

General

Brand	Detecto
Model	DL1060
Category	Scales
Language	English