EN - 43SE-DV64-HE
Ramp Options
1. Select Ramp
2. Choose Ramp Time.
(if unlocked).
3. Set Ramp Time
(From 0-45 minutes in 5
min increments)
4. View Ramp Pressure
(set by the provider)
Humidity Settings
1. Select Humidity
2. Choose humidity
setting of OFF or 1
through 5 bars. NOTE: 5
bars is the highest
humidity.
Tubing Settings
1. Select Tubing
2. Select Diameter: 15mm or 22mm
3. Select Length if 22 mm
Diameter. NOTE: These
settings must match the tubing
you are using for pressure at
the mask to be correct.
FEATURES AND SETTINGS
CPAP Settings Menus
Diameter 15mm 22 mm
Length 1.8 m (6’) 1.8 m (6’), 2.4 m (8’), 3.0 m (10’), 3.7 m (12’)
When activated, this feature gradually ramps up
the device to prescription pressure to help you fall
asleep easier.
Allows adjustment for optimal therapy based on your
tubing dimensions.
(Setting only applicable if you
have the optional heated
humidi cation.)
NOTE: Refer to Replacement Items/Spare Parts section to verify
tubing diameter.
NOTE: Bacteria lter option is set by the provider.
To Next Page
Loading...
