Devolo dlan pro 1200+ wifi ac - System;Services

43 Network configuration
devolo dLAN pro 1200+ WiFi ac/n
4.3.5 System/Services
Here you can specify which protocols are used to ac-
cess the dLAN pro 1200+ WiFi ac/n.
mDNS
multicast DNS is used by Linux and MacOS in order to
access network-compatible devices.
Remote syslog
If you have enabled the remote syslog (see 4.3.2 Sys-
tem/Management), you can enter the remote syslog
server's IP port so that the dLAN pro 1200+ WiFi ac/n
can write log data to the server configured here.
SNMP
The simple network management protocol provides
central monitoring and control of network nodes (such
as routers, servers, switches, printers, computers).
SSDP
The simple service discovery protocol is a network pro-
tocol used for searching for UPnP devices in the net-
work. Windows uses this protocol in order to display
the dLAN pro 1200+ WiFi ac/n in the network environ-
ment.
SSH
The SSH protocol allows console-based access to the
device (standard TCP port: 22).