Devolo dlan pro 1200+ wifi ac - Wifi;Ssids

61 Network configuration
devolo dLAN pro 1200+ WiFi ac/n
You should select multiple data rates as basic rates,
e.g. 6, 12 or 24 Mbps (recommended) so that multicast
packets are sent at 24 Mbps, if possible.
Furthermore, the smallest selected basic rate is used
for emitting the SSID (beacon). The larger this rate is,
the more efficient the WiFi is being used. Note that this
can reduce the maximum range.
4.6.4 WiFi/SSIDs
The dLAN pro 1200+ WiFi ac supports up to 8 WiFi
access points (multi-SSID), each with two frequency
bands of 2.4 GHz and 5 GHz, i.e. you can use the
dLAN pro 1200+ WiFi ac to operate up to 16 WiFi
networks.
The dLAN pro 1200+ WiFi n supports up to 8 WiFi
access points with the frequency band of 2.4 GHz.
Click the table row of the respective WiFi access point
to reach its settings.
Enable
Here you can switch the SSID on/off.
SSID
The SSID specifies the name of your wireless network.
You can see this name when logging onto the WiFi, al-
lowing you to identify the correct subnet. By default,
the SSID (e.g. devolo-123) consists of devolo and the
last three digits of the serial number.