Initial use 24
devolo dLAN pro 1200+ WiFi ac/n
Note the WiFi key of the
dLAN pro 1200+ WiFi ac/n before the net-
working procedure. You will find the device's
unique key (WiFi key) on the label on the back
of the housing.
In order to connect the
dLAN pro 1200+ WiFi ac/n with your laptop,
tablet or smartphone later via WiFi, enter the
noted WiFi key as the network security key.
In the following sections we describe how to connect
the dLAN pro 1200+ WiFi ac/n and integrate it into
the network. We clarify the exact procedures based on
potential network scenarios:
3.4.1 Single Kit – Expanding an existing
dLAN pro network
햲 Plug the dLAN pro 1200+ WiFi ac/n into a wall
socket. The device is ready to operate once the
indicator light of the encryption button with the
home icon turns white (after approximately 45
seconds).
To disconnect the
dLAN pro 1200+ WiFi ac/n from the
mains supply, unplug the device from
the electrical socket. The power
socket and all connected network de-
vices should be easily accessible so
that you can pull the mains plug
quickly if needed.
Integrating the dLAN pro 1200+ WiFi ac/n into an
existing dLAN pro network
Before you can use the dLAN pro 1200+ WiFi ac/n in
your dLAN pro network, first you have to connect it to
your existing dLAN pro devices as a network. This is ac-
complished by using the shared dLAN password. This
forms a delimited dLAN pro network. Shared use of the
dLAN password serves as access control to the dLAN
pro network as well as the encryption, and thereby the
interception protection, of the transmitted data.
The dLAN password can be set in different ways:
dLAN pro network encryption at the touch of a
button (home icon)
햳 First press the encryption button (for about 1
second) on a device in your existing network and
then, within 2 minutes, press the encryption
button with the home icon (for about 1 second)
on the new dLAN pro 1200+ WiFi ac/n.
To Next Page
Loading...
