Dexon DIMAX804KC - Figure 3-12. Add;Modify Calendar Based Events Panel

DIMAX804KC User’s Manual
DEXON Systems 19
3.5.1.1 Create Scheduler Event
Follow these steps to add a presentation:
1. Click the Calendar button
2. Click the calendar area
3. Add a name of the event
4. Select an Event type from the Protocol dropdown list (Recall Layout or send string/hex
over Serial Port, for example: hex: 01 A4 05 30 01, means 1 byte = 2 hex digit and 1
space)
5. Fill data form
6. Check the Active All Day Every Day box if you would like the presentation to play at all
times. This type of events will start every start up and every midnight.
7. Use the Start Time and End time fields to specify a time range for the presentation.
8. Check the Recurring Event box if you want the presentation to play on a repeating
schedule during a specific date range. Check All Days or specify certain days of the
week. It is necessary to specify a Start Date and End Date if the Recurring Event box is
checked.
9. Click OK once you have finished configuring the calendar based presentation.
Note: You can disable all events with Enable checkbox, which is located in left top corner.
Figure 3-12. Add/modify calendar based events panel