DIMAX804KC User’s Manual
36
DEXON Systems
The DIMAX server sends output_timing reply message to the client in response to the
query_output_timing request. This reply contains all information of specified output timings.
Attributes:
• id: output identifier
• mode_id: output timing identifier
Elements:
• pixelclock: pixel frequency
• interlaced: interlaced, values: Yes, No
• hactive: horizontal active
• vactive: vertical active
• hblank: horizontal blank
• vblank: vertical blank
• hfrontporch: horizontal front porch
• vfrontporch: vertical front porch
• hsyncwidth: horizontal sync
• vsyncwidth: vertical sync
• hpol: horizontal polarity
• vpol: vertical polarity
4.2.4
Advanced
QUERY_MISC_CONFIG
query_misc_config - Request
Request message:
<query_misc_config />
Description:
The query_misc_config request is used to obtain configuration information on advanced
parameters.
misc_config - Reply
Reply message:
<misc_config>
<password protected="{No|Yes}" />
<mac_address id="n">n:n:n:n:n:n</mac_address>
<dhcp id="n">{Yes|No}</dhcp>
<ipv4_address id="n">n.n.n.n</ipv4_address>
<network_mask id="n">n.n.n.n</network_mask>
<wakeup_scheduler time="h:i" recurring="{No|Yes}">{No|Yes}</wakeup_scheduler>
<standby_scheduler time="h:i" recurring="{No|Yes}">{No|Yes}</standby_scheduler>
<osd left="n,nn" top="n,nn" time="n" bgcolor="0xhhhhhh" textcolor="0xhhhhhh"
highlightedcolor="0xhhhhhh">{Auto|Yes|No}</osd>
<transition duration="n">{Cut|Fade}</transition>
<serial_port>
<baud_rate>{115200|57600|38400|19200|9600}</baud_rate>
To Next Page
Loading...