DIMAX804KC User’s Manual
DEXON Systems
49
STANDBY
standby - Request
Request message:
<standby needack="{Yes|No}" />
Description:
The standby request is used to activate the standby mode.
This request is available only for clients with administrator privilege.
5
SOFTWARE AND FIRMWARE UPDATES
This operating software and firmware may be updated for possible improvements and new
features.
Create an installation USB memory stick
The update package contains folder called DUA_pollingPi. Copy this folder to the
root folder of the pendrive.
Be sure that the memory stick is not write protected and file system is FAT32. The
software has to remove some installation files (*.sh) during the update process from
the pendrive.
Plug the USB stick into the USB port
The software will automatically recognize the installation material within 1-2 minutes.
The upgrade process will be started automatically.
During the upgrade process the device will be restarted two times.
The device automatically checks the firmware version. If there is a version
mismatch, then the F/W updating start automatically.
The progress of the update will be displayed on the LCD screen.
Do not interrupt this process. When the update process is finished, the LCD screen
displays the initial login message – hopefully without the firmware warning.
To Next Page
Loading...