Dexon DIMAX804KC - Output

DIMAX804KC User’s Manual
DEXON Systems 27
The DIMAX server sends input_info reply message to the client in response to the
query_input_info request. The DIMAX server sends input_info event message to the client if
the input signal has been changed.
Attributes:
• id: input identifier
• valid: Yes, if input signal is valid, No, if the input signal is invalid.
Elements:
• hres: horizontal resolution
• vres: vertical resolution
• hfreq: horizontal frequency
• vfreq: vertical frequency
• htotal: horizontal total
• vtotal: vertical total
• hstart: horizontal start
• vstart: vertical start
• hactive: horizontal active
• vactive: vertical active
• hpol: horizontal polarity
• vpol: vertical polarity
• interlaced: Possible values: Yes, No
• hdcp: Possible values: Yes, No
• hdcp_version: Possible values: n/a, 1.X, 2.0, 2.2 Type 0, 2.2 Type 1
4.2.3 Output
QUERY_OUTPUT_STATUS
query_output_status - Request
Request message:
<query_output_status />
Description:
The query_output_status request is used to obtain the HDCP status of the outputs
output_status - Reply
Reply message:
<output_status>
<hdcp id="n">{Yes|No}</hdcp>
...
</output_status>