DIMAX804KC User’s Manual
26
DEXON Systems
</crop>
</config_input>
Description:
The config_input request is used to set parameters of a specific input. This request is available
only for clients with administrator privilege.
Attributes:
• id: input identifier
Elements:
See details in description of input_status reply message.
input_status - Reply
See details in description of query_input_status message.
QUERY_INPUT_INFO
query_input_info - Request
Request message:
<query_input_info id="n" />
Description:
The query_input_info request is used to obtain timing information on a specific input.
Attributes:
• id: input identifier
input_info - Reply
Reply message:
<input_info id="n" valid="{Yes|No}">
<hres>n</hres>
<vres>n</vres>
<hfreq>{n|n/a}</hfreq>
<vfreq>n</vfreq>
<htotal>{n|n/a}</htotal>
<vtotal>{n|n/a}</vtotal>
<hstart>{n|n/a}</hstart>
<vstart>{n|n/a}</vstart>
<hactive>{n|n/a}</hactive>
<vactive>{n|n/a}</vactive>
<hpol>{Positive|Negative|n/a}</hpol>
<vpol>{Positive|Negative|n/a}</vpol>
<interlaced>{Yes|No|n/a}</interlaced>
<hdcp>{Yes|No}</hdcp>
<hdcp_version>{n/a|1.X|2.0|2.2 Type 0|2.2 Type 1}</hdcp_version>
</input_info>
Description:
To Next Page
Loading...