Dexon DIMAX804KC - Layout

DIMAX804KC User’s Manual
38 DEXON Systems
<transition duration="n">{Cut|Fade}</transition>
<serial_port>
<baud_rate>{115200|57600|38400|19200|9600}</baud_rate>
<databits>{8|7}</databits>
<parity>{None|Even|Odd|Mark|Space</parity>
<stopbits>{1|1.5|2}</stopbits>
<flow_control>{None|XonXoff|Hardware}</flow_control>
</serial_port>
<log_config error="{Yes|No}" warning="{Yes|No}" info="{Yes|No}" hwmonitor="{Yes|No}"
debug="{Yes|No}" trace="{Yes|No}">{Yes|No}</log_config>
<date>mm/dd/yyyy</date>
<time>h:i:s</time>
</config_misc>
Description:
The config_misc request is used to set configuration information on advanced parameters.
This request is available only for clients with administrator privilege.
Elements:
• password: administrator password. The clear attribute is used to remove the current
password
• dhcp: enable or disable dhcp
• ipv4_address: ipv4 address. It is required if dhcp is disabled.
• network_mask: network mask
• serial_port: RS-232 port settings.
• osd: the On Screen Display information panel visualization parameters.
• button_function: possible values: Normal Open, Auto Open
• transition: possible values: Cut, Fade. In case of Fade the duration of the transition
period is specified in seconds by the Duration attribute.
• log_config: logging configuration. The logging can be turned on or off generally.
Further, the different types of log messages can be turned on or off individually: error,
warning, info, hwmonitor, debug, trace
• date and time: the current date and time set on the device
• wakeup_scheduler: a time value when the device will deactivate the standby mode
• standby_scheduler: a time value when the device will activate the standby mode
misc_config - Reply
See details in description of query_misc_config message.
4.2.5 Layout
QUERY_LAYOUT_STATUS
query_layout_status - Request
Request message:
<query_layout_status />
Description:
The query_layout_status request is used to obtain configuration information on layout
parameters.