Dexon DIMAX804KC - Page 34

DIMAX804KC User’s Manual
30 DEXON Systems
CONFIG _OUTPUT
config_output - Request
Request message:
<config_output id="n">
<name>xxxx</name>
<background_color>0xhhhhhh</background_color>
<resolution recommended_mode="{Yes|No}">n</resolution>
<hdcp_enable>{Yes|No}</hdcp_enable>
<keepaspectratio keep_dimension="{Width|Height}"
keep_position="{Center|Start|End}">{No|Yes}</keepaspectratio>
<pip_keepaspectratio keep_dimension="{Width|Height}"
keep_position="{Center|Start|End}">{No|Yes}</pip_keepaspectratio>
<frame left ="n" top ="n" right ="n" bottom ="n" color ="0xhhhhhh">{No|Yes}</frame>
<pip_frame left ="n" top ="n" right ="n" bottom ="n" color
="0xhhhhhh">{No|Yes}</pip_frame>
<opacity>n</opacity>
<pip_opacity>n</pip_opacity>
<crop>
<left>n,nn</left>
<top>n,nn</top>
<width>n,nn</width>
<height>n,nn</height>
</crop>
<placement>
<left>n,nn</left>
<top>n,nn</top>
<width>n,nn</width>
<height>n,nn</height>
</placement>
<pip_crop>
<left>n,nn</left>
<top>n,nn</top>
<width>n,nn</width>
<height>n,nn</height>
</pip_crop>
<pip_placement>
<left>n,nn</left>
<top>n,nn</top>
<width>n,nn</width>
<height>n,nn</height>
</pip_placement>
</config_output>
Description:
The config_output request is used to set configuration information on a specific output.
This request is available only for clients with administrator privilege.
Attributes:
• id: output identifier
Elements:
• name: name of the output
• background_colour: background colour