Both dryers are operated by the controller at the left midpoint of the dryer. The controller is two-
in-one with the upper display and lights dedicated to the upper dryer and lower display and lights
dedicated to the lower dryer.
When money has been deposited, the control will prompt the user to choose a drying temperature
and press the “start” button. Time is not added until this occurs for either the upper or lower dryer.
If no purchased time is available on the control, the vend price is displayed.
The drying program (temperature) selected by the user is indicated by the red lights at the top
and bottom. When the dryer is in use, the drying temperature may be displayed by simultaneously
pressing the “start” button and the button of the temperature selected.
OPERATING INSTRUCTIONS
STARTING THE DRYER
1. Load clothes into either the upper or lower dryer (or both). Close the door(s)
completely.
2. Deposit coins equal to or greater than the displayed vend price. The control will
prompt the user to choose a drying temperature. Time is not added until this occurs
for either the upper or lower dryer.
3. Select drying temperature by pressing the appropriate button for the dryer to be
used. This will turn on the red light showing the selected temperature.
4. Press “start” button to start dryer. This will display the drying time purchased.
RUNNING THE DRYER
-Opening the door will stop the dryer. The dryer will restart, if time has not expired, upon
closing the door and pressing the “start” button.
-Selected temperature may be changed at any time (unless Temperature Pricing feature is
activated).
-Running time may be extended by depositing coins and pressing the “start” button for the
correct dryer. Unless time has expired, the controller will accept coins whether or not the
original vend price is equaled.
If time has run out, the dryer must be restarted as if it was at the beginning of drying the
load, which requires meeting or exceeding the vend price.
DESCRIPTION OF DRYER CONTROL
22
Part # 8533-090-001 7/21
To Next Page
Loading...
Need help?
General
