36
Part # 8533-090-001 7/21
PROGRAMMING THE DRYER CONTROL
The dryer control can be programmed to prompt the user for alternate vend prices, change dryer cycle
times, temperatures and many other options. This can be accomplished in two ways:
1. Manual programming utilizing the “Start”, “High”, “Medium” and “Low” buttons for the bottom
dryer.
2. USB download of a customizable User File. For instructions on using the USB download feature,
please contact your local Dexter distributor or visit DexterLive.com.
MANUAL PROGRAMMING:
The dryer must be in idle mode for the manual programming menus to be accessed. Idle mode is when the
dryer is not actively running a drying cycle and the vend price is displayed on the screen (for both upper
and lower dryers).
To enter the manual programming mode, the control tray on the dryer must be unlocked and pulled out to
reveal the programming button. The programming button is then pressed for 1 second. The control should
display “DRYER PROGRAMMING”.
See the gure below for the location of the programming button on the control tray.