Diatron Abacus junior 30 - Specifications

INTRODUCTION
13
1.8. Specifications
Sample volume
25 μl of whole blood in normal 3-part or non-diff mode
50 μl of whole blood in pre-diluted mode
Chambers
1 unified chamber for diluting whole blood and counting
Reagent system
Isotonic Diluent, Lyse, Cleaner
Aperture diameter
70 μm (RBC/PLT, WBC)
Throughput
30 tests/hour
Characteristics
Parameter:
Accuracy
Reproducibility
(CV)
Carry-over
sample to
sample
Test range
Unit
WBC
3%
3%
<1%
4.0-20.0
10
3
/μl
RBC
3%
2%
<1%
4.0-15.0
10
6
/μl
HCT
3%
3%
<1%
25.0-50.0
%
MCV
2%
1%
N/A
60-100
fl
HGB
2%
2%
<1%
9-16
g/dl
PLT
5%
5%
<3% or <20
200-900
10
3
/μl
Note: Differential results for WBC counts below 1.00 are not displayed, due to low cell count
Sampling method
Open tube system with automatic sample rotor.
Sample types
Human (general), male, female, baby, toddler and child.
Clog prevention
High-voltage pulse on aperture in each analysis cycle, chemical cleaning and
high pressure back-flush of the aperture using Cleaner reagent.
Cleaning procedure
High-voltage burst of the aperture, high-pressure back-flush, chemical
cleaning of the aperture using Cleaner reagent.
Calibration
1 or more measurement automatic and manual (factors) calibration of WBC,
HGB, RBC, PLT, MCV (or HCT), RDW, and MPV.
User interface
Easy-to-use, menu driven user interface with touch-screen and separate
START button, status LED.
Languages available
English, Spanish, Portuguese, French, Russian, Indonesian, German, Italian,
Czech
Data capacity
1000 results, with RBC, PLT, and WBC 3-part histogram
Host computer interface
USB B port
Data back-up method
USB mass storage device
Software upgrade method
via USB A port using USB mass storage device
Printer interface
USB with support for HP printers (DeskJet, LaserJet, PCL3, PS, LIDIL)
EPSON Dot-matrix printers
Built-in printer
Axiohm thermal printer module, 58 mm wide roll paper, full report with
histograms
Display
320x240 -dots, high-contrast, backlit, color graphics LCD (liquid crystal
display)
User interface
Full-LCD Touch-screen + separate START button, red/green state LED
External keyboard
USB keyboard via USB A port
Power requirement
12VDC, 5A, 60W max. operating power
Power supply unit
External, auto-ranging power unit for 100-120 or 200-240 VAC, 50–60Hz
Operating temperature
59–86 °F (15–30 °C). Optimal temperature is 77 °F (25 °C)
Dimensions (W x D x H)
12.6 x 10.2 x 14.4 in (320 x 260 x 365 mm)
Net weight
12 kg