11.2. SELF-SERVICE MODE [ 7 2 ]
This mode operates by placing the weight on the dish and
pressing the corresponding direct key. The label of the
product selected is thus obtained, without the intervention of
a sales assistant.
DIBAL 500 Range models of scale which can operate in this
working mode.
In self-service mode only the direct keys are operational, and
depending the model, simple number keys (Keys 0...9).
11.2.1. Self-service Mode Configuration [ 7 2 1
]
To configure the scale in self-service mode the process is as
follows:
1. Make sure the scale is set up as master, press MENU 2
seconds.
2. Press 7 2 1.
3. Use C to choose between self-service mode, YES, or
assisted mode, NO.
4. Press
∗
∗∗
∗
to save.
5. Press MENU 2 seconds to quit the programming menu.
If the Self-service mode is selected, the following
parameter functions are not available: Automatic Weight,
Fix Price and Label per Weight.
To Next Page
Loading...
