19.LINERLESS APPENDIX
The “LINERLESS” system uses for printing a special type of adhesive thermal paper without backpaper.
19.1. MODELS
The 500 series scales equiped with the “LINERLESS” option can also print standard continuous paper or
adhesive continuous labels just changing the labels cassette.
The option “Linerless” is available only in the scales Mistral, Tornado and Star which include the labels
cassette.
19.2. LABELLING ASSEMBLY
The “Linerless” labelling assembly includes the following changes:
• New labels transport silicone roll, different to the standard one
• New cassette, without backpaper rewinder.
19.2.1.LINERLESS CASSETTE
The labels cassette in models “Linerless” has a special design, different to the standard one.
The main differences between the linerless cassette and the standard one are the following:
The closing system for paper roll and the clip for selection of paper width are red coloured.
There is not backpaper rewinder.
Linerless Cassette
Standard Cassettes
Linerless systems is only available in M-525
To Next Page
Loading...
