Digi TransPort WR21 - Page 382

Configuring network interfaces Configure PPP and external modems
Digi TransPort® Routers User Guide
382
Command Instance Parameter Values Equivalent web parameter
ppp n hrtbeatint 0-
2147483648
Send Heartbeat messages
to IP address a.b.c.d every h
hrs, m mins, s secs
ppp n hbipent Blank, PPP,
ETH
Blank is
default
Use interface x,y for the
source IP address
ppp n hbipadd Valid
interface
number
0-
2147483648
Use interface x,y for the
source IP address
ppp n hbiproute off, on Select transmit interface
using the routing table
ppp n hbimsi off, on Include IMSI information in
the Heartbeat message
ppp n hbgps off, on Include GPS information in
the Heartbeat message
ppp n None off, on Generate Ping packets on
this interface
ppp n pingsiz 0-
2147483648
Send n byte pings to IP host
a.b.c.d every h hrs, m mins, s
secs
ppp n pingip Valid IP
address
a.b.c.d
Send n byte ping to IP host
a.b.c.d every h hrs, m mins, s
secs
ppp n pingint 0-
2147483648
Send n byte ping to IP host
a.b.c.d every h hrs, m mins, s
secs
ppp n pingint2 0-
2147483648
Send pings every h hrs, m
mins, s seconds if ping
responses are not being
received
ppp n pingip2 Valid IP
address
a.b.c.d
Switch to sending pings to IP
host a.b.c.d after n failures
ppp n ip2count 0-
2147483648
Switch to sending pings to IP
host a.b.c.d after n failures
ppp n pingresp 0-
2147483648
Ping responses are expected
within s seconds