Using the web interface Log in to the device
Digi TransPort® Routers User Guide
105
Log in to the device
By default, Digi Transport routers have a static IP address of 192.168.1.1 with DHCP server enabled.
To access the router using a web browser:
1. If the Digi TransPort router is not already connected to a LAN, connect an Ethernet cable
between the LAN port on the Digi Transport and your PC.
Note All TransPort WR models are auto-sensing for 10/100 operation. Most models are also
auto MDI/MDX, such as will automatically work with either a straight-through or cross-over
cable.
2. Open a web browser. Enter the router’s Ethernet IP address (192.168.1.1) into your web
browser after configuring your PC to have an address on the same subnet. A login page
appears.
3. Enter the default username, username, and the default password password and click the Log
In button and enter the default password, password and click Log In button. The password
appears as a series of dots for security purposes.
Note Digi recommends changing the default username and password for all users. See
Configure user security settings.
After entering the username and password, the Home page is displayed. This page is
the main operations page for the router. The main menu is on the left side of the Home
page. Clicking menu items displays the settings or operations for that item.
To Next Page
Loading...
