Digi TransPort WR44 - Perform a Rogue Scan

Configuring network interfaces Configure Wi-Fi interfaces
Digi TransPort® Routers User Guide
222
Perform a rogue scan
Wi-Fi-equipped TransPort routers can perform a rogue scan to scan the Wi-Fi channels and will which
Wi-Fi Access Points it detects. You can use rogue scans to detect unauthorized Access Points that
might be trying to get unsuspecting Wi-Fi clients to connect them. When the router detects an
authorized Access Point, the router creates an event log entry. In addition, you can configure
triggering an alarm notification, such as email, SMS message, or SNMP trap. From the rogue scan
results, you can save a list a list of the MAC addresses of the authorized Access Points that will not be
reported when detected.
ÉWeb
1. Go to Configuration > Network > Interfaces > Wi-Fi > Rogue Scan.
2. In the MAC Address field, enter The MAC address of an authorized Access Point
3. Click Add to add the authorized Access Point to the list of authorized Access Points.
4. Click Perform Rogue Scan. The router scans the Wi-Fi channels to detect unauthorized Access
Points.
5. Click Apply.
Command line
Command Instance Parameter Values
Equivalent web
parameter
macrogue n mac MAC address with no separators, for
example 112233445566
MAC Address