Configuring security Configure user security settings
Digi TransPort® Routers User Guide
754
Configure user security settings
É
Web
1. Go to Configuration > Security> User.
The User parameter pages allow you to configure several authorized users. The number of
users available depends on the firmware build the router is running. Each user has a password
and access level that determines the facilities to which the user has access.
2. For each user, configure user parameters
Username
The name of the user. Usernames can be up to 14 characters long. You can use some special
usernames:
Username Description
%s Uses the serial number of the router as the username.
%i Uses the IMEI of the cellular module as the username.
%c Uses the ICCID of the SIM as the username.
If a % symbol is part of the username, you must enter another % character as an escape
character. For example user%1 should be entered as user%%1.
Password / Confirm Password
The password for the user. Up to 14 characters are allowed.
Access Level
Selects the access level for the user. There are the following options:
Access level Access allowed
Super Allows full access to all facilities.
High Allows user to reconfigure the general configuration of the router
and to change some settings such as the time and date.
Not allowed to change user settings.
Medium Allows user to access medium level configuration commands which
allow some configuration of the router.
Low Allows user to access low level commands which tend to be status
and statistics commands.
Read Only Read only access of the configuration.
None User is not allowed to login via Web, FTP, SSH, and Telnet.
To Next Page
Loading...
Need help?
General
