Hardware features TransPort WR44 RR hardware features
Digi TransPort® Routers User Guide
91
TransPort WR44 RR hardware features
Front panel
1. POWER LED:
n Off: No power
n Green: TransPort device is powered
2. LAN (0, 1, 2, 3) LED: Illuminates steadily when there is a network connection to the LAN port
and flashes when data is transmitted or received.
3. Wi-Fi LED:
n Wi-Fi models only: Illuminates steady if Wi-Fi activity is present.
4. SERIAL LED: Illuminates steadily if a terminal is connected to the SERIAL port and the DTR
signal is on.
5. LINK LED: Illuminates steadily when a wireless WAN data connection has been established.
6. SIM LED: Illuminates steadily when a valid SIM card is installed.
7. ACT LED: Flashes to indicate that data is being transferred over the wireless WAN network.
8. SIGNAL LEDs: Indicate strength of cellular signal.
n 3 LEDs: Excellent
n 2 LEDs: Good
n 1 LED: Fair
n 0 LEDs: Poor or No signal
9. SIM / R-UIM sockets (SIM card models only): SIM 1 and SIM 2 are for use with the SIMs or R-
UIMs (Removable User Identification Modules).
Rear panel
To Next Page
Loading...
