Configuring network services Configure network services
Digi TransPort® Routers User Guide
409
Configure network services
The Network Services Settings page configures a set of common network services that are available
for the router, and the network port on which the service is running. You can enable and disable
common network services and configure the TCP/UDP port on which the network service listens. You
can disable services as needed for security purposes. That is, you can disable certain services so the
device runs only those services specifically needed. To improve device security, you can disable non-
secure services such as Telnet.
É
Web
1. Go to Configuration > Network > Network Services.
On the Network Services page, you can quickly enable or disable network services without
having to navigate to multiple sections of the menu. Some network services have additional
configuration settings.
To Next Page
Loading...
