Configuring network interfaces Configure IPv6 addressing support
Digi TransPort® Routers User Guide
337
IPv6 support in the web interface
ÉWeb
Support for IPv6 addressing in the web interface is limited to configuring Ethernet interfaces, WANs,
and LANs to use IPv6 addressing. The command-line interface provides more functionality for
managing and displaying IPv6 address information. See IPv6 support in the command-line interface.
Configuration > Network > Interfaces > IPv6
IPv6-enabled interfaces
IPv6 is enabled on the following interfaces:
Interface IPv6 WAN/LAN Instance Action
ETH 0 IPv6 WAN 0 Delete
(ETH 0-27 dropdown) (IPv6 WAN 0-1, IPv6 LAN 0-5
dropdown)
Add
IPv6 WAN
n IPv6 WAN 0
l Enable router learning on this interface
l Enable DHCPv6 client on this interface
n IPv6 WAN 1
IPv6 LAN
n IPv6 LAN 0
l Mode: (SLAAC/DHCPv6/SLAAC+DHCPv6 dropdown)
l Subnet ID:
l Subnet ID Length:
n DHCPv6 Server (visible only if DHCPv6 or SLAAC+DHCPv6 is selected)
l Preference Value:
To Next Page
Loading...
