Revision history—90001019
Revision Date Description
N January 2016
n Updated TransPort WR31 serial pinout diagram.
n Updated Dynamic DNS content.
P June 2017
n Added TransPort WR44 R and WR44 RR models.
n Added RED (Radio Equipment Directive).
n Added configuration parameters for Wi-Fi roaming
in client mode.
R May 2018
Updated content for the Digi TransPort version 6.1.x.
n Added support for IPv6.
n Updated content for configuring supported cellular
modules.
n Added instructions for enabling health reporting via
Digi Remote Manager.
n Added descriptions for backup and restore settings.
n Miscellaneous editorial corrections.
S July 2018
Updated content for the Digi TransPort version 6.1.x.
n Added support for Cellular GPS to the WR31.
T September 2018
Updated content for the Digi TransPort version 6.1.x.
n Added support for automatic APN selection.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2018 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
Digi TransPort® Routers User Guide
2
To Next Page
Loading...
