Digi TransPort WR44 - Page 574

Configuring Quality of Service (QoS) Configure Quality of Service (QoS)
Digi TransPort® Routers User Guide
574
4. Click DSCPalteration. On this page, you can update the DSCP values on an IP stream (with
matching DSCP value) if the measured throughput for that stream goes above a certain value.
Other parts of the network will slow the traffic down if necessary. You can also update the
DSCP values on traffic inside a GRE tunnel.
Queue Profile
The queue number that relates to the queues defined in the DCSP mappings page.
DSCP change start kbps
The throughput when changing the DSCP value is enabled.
DSCP change stop kbps
The throughput when changing the DSCP value is disabled.
DSCP to set
The value to set the DSCP value to.
Set DSCP in GRE
Enables setting the DSCP of IP packets within GRE tunnels.
5. Click Apply.
Command line
Configure DSCP mappings
Command Instance Parameter Values Equivalent web parameter
dscp n q 0-63
Default 4
Queue