Command|8 Guide44
Software Synths and Rewire
Applications
Command|8 automatically supports any soft-
ware synthesizers running as TDM or RTAS plug-
ins in Pro Tools (see “Plug-ins and Inserts” on
page 38).
Stand-alone software synths, samplers, effects,
and Rewire-compatible applications (such as
Reason, Live, and similar) can also be controlled
by Command|8, letting you switch back and
forth between environments while maintaining
tactile control of session functions.
Doing so utilizes Command|8 Stand-Alone
mode, in which faders, encoders, and switches
can be programmed to control virtually any
software or hardware device parameter that sup-
ports MIDI CC messages. Eight user presets can
be stored and recalled in onboard memory, with
support for SysEx dump and recall. For more in-
formation, see Chapter 5, “Using Stand-Alone
Mode.”
To Next Page
Loading...
Need help?
General
