DigiDesign Command|8 User Manual

Command|8 Guide58
Switch Test
Use this test to evaluate the performance of
Command|8 switches.
To test switches:
1 Press the F1 Utility switch to enter Utility
mode.
2 Press the Channel Select switch that corre-
sponds to Switch.
3 Press any Command|8 switch to test it. The
LCD displays the location and name of each
switch as you test it.
4 Press the Channel Select switch that corre-
sponds to Exit.
5 Press the F1 Utility switch to exit Utility mode.
Encoder Test
Use this test to evaulate the performance of the
Command|8 rotary encoders.
To test the encoders:
1 Press the F1 Utility switch to enter Utility
mode.
2 Press the Channel Select switch that corre-
sponds to Encodr.
3 Rotate any encoder to test it. Encoder value is
displayed in the LCD while testing.
4 Press the Channel Select switch that corre-
sponds to Exit.
5 Press the F1 Utility switch to exit Utility mode.
Burn-In Test
Use this test to activate all of the indicators and
controls on Command|8 simultaneously.
To run the Burn-In Test:
1 Press the F1 Utility switch to enter Utility
mode.
2 Press the Channel Select switch that corre-
sponds to BurnIn.
3 Press the Select switch on Channel 8 to stop
the test.
4 Press the F1 Utility switch to exit Utility mode.

DigiDesign Command|8 Specifications

General

Brand	DigiDesign
Model	Command|8
Category	Music Mixer
Language	English