DigiDesign Command|8 User Manual

Appendix A: Utility Functions 55
appendix a
Utility Functions
Command|8 Utility functions include the fol-
lowing:
• Viewing software and firmware versions
• Calibrating faders
• Testing of faders, encoders, LEDs, switches,
and the LCD
Accessing Utility Mode
To access Command|8 Utility mode:
1 Press the F1 Utility switch. The LCD displays
the available Utility functions across the upper
row.
2 Press a Channel Select switch to choose the
corresponding Utility function.
3 To cancel a Utility function or test at any time,
press the flashing F1 Utility switch again.
Viewing Command|8 Version
Data
This Utility function lets you check the current
firmware version and other statistics useful
when upgrading, or when contacting technical
support.
To display Command|8 version data:
1 Access Utility mode.
2 Press the Channel Select switch that corre-
sponds to Fadcal. The LCD shows version infor-
mation about various components of
Command|8.
3 Press the Channel Select switch that corre-
sponds to Exit.
4 Press the F1 Utility switch to exit Utility mode.

DigiDesign Command|8 Specifications

General

Brand	DigiDesign
Model	Command|8
Category	Music Mixer
Language	English