D i g i g r a m
10
Updating the VX driver for Mac OS X
Just install the new version as described above to overwrite the previous
version installed.
Installation under Windows 98 SE and Millennium
If the driver has been downloaded from our web site, it has to be expanded
prior to the driver’s installation as follows. Double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
• Turn off the computer and insert the card.
• Restart the computer.
• The wizard will detect the card when it is inserted, and prompt for a
new driver.
• Click Next to start the driver installation.
• Select Display a list of all the drivers… to select a specific driver and
click Next.
• Select the <Sound, video and game controllers> category and click
Next.
• Click on the Have Disk button.
• Browse to the drive where the installation files are located (on the CD-
Rom or in the update’s extracting destination folder) and click OK.
• The wizard displays the suitable driver. Click OK to continue.
• Click on the Next button to start copying the driver files.
• Click on the Finish button to complete the driver installation.
The registry database is updated so that the ASIO compliant programs show
the Digigram VX ASIO driver in the list of available ASIO drivers. To take full
advantage of your VX222
v2, select the Digigram VX ASIO driver from the
application program’s specific audio I/O settings.
Removing the driver under Windows 98 SE and
Millennium
To remove the VX driver, make sure the card is present before starting the
following procedure:
• Go to <Start> <Settings> <Control panel> <Add/Remove Programs>.
• Select the ‘Digigram VX Kit …’ and remove it.
• Follow the instructions of the InstallShield wizard.
To Next Page
Loading...
