Digigram VX222v2 - Wave Mixer Saving Configuration; Wave Mixer Loading Configuration; Leaving the Wave Mixer; Wave Mixer General Settings

D i g i g r a m
20
Setting the default values for each mixer line selected
Right click on the mixer icon in the taskbar, or go to the mixer Options menu.
Select Save current configuration as default.
Getting the default configuration values for the mixer line
selected
Right click on the mixer icon in the taskbar, or go to the mixer Options menu.
Select Load default configuration.
Leaving the mixer program
Click on the right button over the mixer icon in the taskbar.
Select Exit.
General settings
Record source
The record source section contains two buttons allowing selection of the input
type used.
• Digital Input: selects the digital input.
• Analog Input: selects analog input.
Clock source
This option allows the selection of the synchronization clock source.
• Automatic: selects the internal clock when analog input is selected, the
digital input clock when digital input is selected.
• Digital: selects the digital input regardless of the source input selection.